Abrasives

• Stick-On Rolls have an adhesive backing to eliminate slip and increase cut efficiency. Rolls can be easily cut to adhere to many shapes for detailed sanding. For superior comfort and efficiency use with our 2¾” Stick-On Hand Sanding Pad.

Features & Benefits

• P-grade, heat-treated, aluminum oxide abrasive.
• Consistent scratch pattern and finish.
• Full resin bond system
• Improved grain adhesion and longest life.
• Unique fiber-reinforced, B-weight latex-saturated backing.
• 50%-60% improvement in tear strength, superior resistance to delamination.
• Flexible – can be wet.
• PSA (pressure sensitive adhesive) backing.
• Special, undyed stearate oversize and an open coat
• Superior load resistance and extended life – no color transfer to work.

In-stock grit and roll lengths:

• 80 Grit: 1yd, 5yds & 25yds
• 120 Grit: 1yd, 5yds, & 25yds
• 180 Grit: 1yd, 5yds, & 25yds
• 220 Grit: 1yd, 5yds, & 25yds
• 400 Grit: 1yd, 5yds, & 25yds
• 600 Grit: 1yd, 5yds, & 25yds

Variety Pack: 

• One yard each of: 80, 120, 180, 220, 400, & 600 grit.

• Full sheets offering all the same characteristics as our Stick-On Rolls.
• Superior load resistance and extended life
• Heat-Treated
• Consistent scratch pattern
• Flexible
• No color transfer

Available by the sheet or full sleeve in the following grit:
80, 120, 180, 220, 400, 600, 800, 1200

Full sleeves quantities:

80 grit – 50 sheets

120-1200 grit – 100 sheets

EZ Touch sanding sponges are specially designed for hard-to-reach areas. These sponges are coated with a high performance abrasives and a waterproof bond so they can be used wet or dry. They can be used on a variety of materials – wood, metal, glass, and composites.

EZ Touch contour sponges are designed to give needed flexibility for hand sanding. Their conform-ability allows you to generate a superior finish and they can be used instead of scuff pads or waterproof sheets.

•  For hand sanding and uniform finishing
• Superior flexibility
• Ideal for Wood Turners

Size: 4 1⁄2" x 5 1⁄2" x 3/16"

Available Grit:

120 – 1500
Medium, Fine, Super Fine, Ultra Fine, Mircro Fine

Our Gray Grain Cleaner is excellent for removing lodged particles left from sanding and used for rubbing out of top-coats.

Use our Gray Grain Cleaner first after final sanding is completed then wipe down with clean cotton cloth repeat with our White Grain Cleaner wipe down with clean cotton cloth, ready for Bush Oil. 

• Ultra fine: silicon carbide abrasive
• Use wet or dry
• Attaches to our hook sanding block

Size: 

• 2 3⁄4" x 5 1⁄2"
• 6" x 9"

Our White Grain Cleaner is excellent for removing lodged particles left from sanding and used for rubbing out of top-coats.

Use our Gray Grain Cleaner first after final sanding is completed then wipe down with clean cotton cloth repeat with our White Grain Cleaner wipe down with clean cotton cloth, ready for Bush Oil. 

• Non abrasive
• Use wet or dry
• Attaches to our hook sanding block

Size: 

• 2 3⁄4" x 5 1⁄2"
• 6" x 9"